Sovol SV06 Plus 3D Printer

Sovol SV06 Plus 3D Printer with 300℃ High Temp 150mm/s High Speed All Metal Hotend, Planetary Dual Gear Direct Drive Touch Screen Auto Leveling 32-bit Silent Board, Printing Size 11.8x11.8x13.4 inch

About this item

• 【Classic I3 Structure with Larger Volume】Different from most 3D printers run by wheels in the market, SV06 Plus has a classic I3 structure which avoids wear and tear of wheels and multiple replacements. 300x300x340mm printing size makes SV06 Plus unique among I3 structure 3d printers. Modular design allows you to assemble SV06 plus within 5 steps easily, more applicable for household use.
• 【150mm/s High Speed High Flow All Metal Hotend】All Metal Hotend with larger melt zone enables you to print faster. High Flow up to 20mm³/s to achieve 150mm/s printing speed that greatly reduces the probability of clogging. Working with SV06 Plus Klipper screen (does not come with the printer, need to purchase additionally), SV06 Plus can reach a fast and upgraded printing speed of 250mm/s.
• 【300℃ High Temp Printing】All metal Hotend Setup makes it possible to print up to 300℃. No need to deal with PTFE replacement anymore, and even no need to flash the firmware, you can print with different materials better and more easily. ( Enclosure is still needed if you want to print over 260℃.)
• 【Planetary Dual Gear Direct Drive】Sovol self-developed All Metal Direct Drive Extruder with planetary dual gear set, provide SV06 plus with higher drive ratio and a lighter motor, helps to achieve more accurate extrusion. Add large external knob for easy feeding.
• 【Upgraded 4.3 inch Touch Screen】Day & Night Modes can be switched casually. The unique Sovol UI and sensitive response bring you better experience than knob display.
• 【25-point Auto Leveling】With inductive sensor, SV06 Plus detects the metal print bed through 25 points automatically and compensate the unevenness of the heated bed. The fast, smart, precise detection and compensation help you to get the bed leveled perfectly and get an fantastic first layer. Note: Set the height of initial layer to 0.3mm when you slice that would help you to printer better initial layer and make the filament stick to the plate better.
• 【PEI Build Plate】The flexible PEI-coated build plate with mesh surface design makes the prints can be removed easily without any tools.